40% Carden Edge 540
Here is my Edge that will be entering it’s 3rd season of flying. It has dual receivers,redundant Lithium packs and 9 digital servo’s. Powered by DA150 twin and KS canasters for mufflers.

40% Fiber Classics Extra 330S
Here is my current project. Although this plane is painted in the mold there is still a ton of work to be done.
Dual Multiplex IPD receivers, redundant Lithium-Ion 4400mah packs, KS canasters for exhaust, Sullivan electronic smoke pump, DA 150 twin engine, 13 digital servos, Pete models carbon fiber spinner, Carbon fiber wing tube, Carbon fiber gear and tailwheel assembly. Also carbon fiber trays throughout. Hiflight Aluminium arm plates mounted on Airwild Uni-hubs for servo arms.Beila 3 blade composite prop painted to match.

KS canasters are mounted with hi-temp silicone fingers and exit out just under wing tube socket.

Carbon fiber plate installed for heat shield. Mounted here will be fuel tank, smoke tank, throttle servo, smoke pump and smoke pump battery.

Rudder servos are mounted on Carbon fiber plate. These will coupled together using Hiflight servo arms and Airwild uni-hubs (not shown yet).

Carbon supports for engine air flow plate.

Engine air flow plate installed.

Ignition and ignition pack mounted on bottom of the airflow plate.